- 浏览: 190550 次
- 性别:
- 来自: 上海
文章分类
最新评论
-
sogo1986:
简直胡说八道
SessionFactoryUtils.getSession(getSessionFactory(), true); -
liuyinhuan:
请问多个Procedure之间能不能用同一个Cursor?怎么 ...
oracle存储过程 cursor使用 -
allengorr:
好人,真的,对于我们这样的初学者,太好了,谢谢!
Hibernate中Session的操作解释 -
deepsea0001:
netstat -n
查询端口使用的命令 -
kaixinwoo1:
:sdaf:
web.xml加载servlet
7个传播行为,4个隔离级别,
Spring事务的传播行为和隔离级别[transaction behavior and isolated level]2007-08-01 16:33事务的传播行为和隔离级别[transaction behavior and isolated level]
Spring中事务的定义:
一、Propagation : key属性确定代理应该给哪个方法增加事务行为。这样的属性最重要的部份是传播行为。有以下选项可供使用:PROPAGATION_REQUIRED--支持当前事务,如果当前没有事务,就新建一个事务。这是最常见的选择。
PROPAGATION_SUPPORTS--支持当前事务,如果当前没有事务,就以非事务方式执行。
PROPAGATION_MANDATORY--支持当前事务,如果当前没有事务,就抛出异常。
PROPAGATION_REQUIRES_NEW--新建事务,如果当前存在事务,把当前事务挂起。
PROPAGATION_NOT_SUPPORTED--以非事务方式执行操作,如果当前存在事务,就把当前事务挂起。
PROPAGATION_NEVER--以非事务方式执行,如果当前存在事务,则抛出异常。
很多人看到事务的传播行为属性都不甚了解,我昨晚看了j2ee without ejb的时候,看到这里也不了解,甚至重新翻起数据库系统的教材书,但是也没有找到对这个的分析。今天搜索,找到一篇极好的分析文章,虽然这篇文章是重点分析PROPAGATION_REQUIRED 和 PROPAGATION_REQUIRED_NESTED的
解惑 spring 嵌套事务 /**
* @author 王政
* @date 2006-11-24
* @note 转载自http://www.iteye.com/topic/35907?page=1
*/ ********TransactionDefinition 接口定义*******************
/**
* Support a current transaction, create a new one if none exists.
* Analogous to EJB transaction attribute of the same name.
* <p>This is typically the default setting of a transaction definition.
*/
int PROPAGATION_REQUIRED = 0;
/**
* Support a current transaction, execute non-transactionally if none exists.
* Analogous to EJB transaction attribute of the same name.
* <p>Note: For transaction managers with transaction synchronization,
* PROPAGATION_SUPPORTS is slightly different from no transaction at all,
* as it defines a transaction scopp that synchronization will apply for.
* As a consequence, the same resources (JDBC Connection, Hibernate Session, etc)
* will be shared for the entire specified scope. Note that this depends on
* the actual synchronization configuration of the transaction manager.
* @see org.springframework.transaction.support.AbstractPlatformTransactionManager#setTransactionSynchronization
*/
int PROPAGATION_SUPPORTS = 1;
/**
* Support a current transaction, throw an exception if none exists.
* Analogous to EJB transaction attribute of the same name.
*/
int PROPAGATION_MANDATORY = 2;
/**
* Create a new transaction, suspend the current transaction if one exists.
* Analogous to EJB transaction attribute of the same name.
* <p>Note: Actual transaction suspension will not work on out-of-the-box
* on all transaction managers. This in particular applies to JtaTransactionManager,
* which requires the <code>javax.transaction.TransactionManager</code> to be
* made available it to it (which is server-specific in standard J2EE).
* @see org.springframework.transaction.jta.JtaTransactionManager#setTransactionManager
*/
int PROPAGATION_REQUIRES_NEW = 3;
/**
* Execute non-transactionally, suspend the current transaction if one exists.
* Analogous to EJB transaction attribute of the same name.
* <p>Note: Actual transaction suspension will not work on out-of-the-box
* on all transaction managers. This in particular applies to JtaTransactionManager,
* which requires the <code>javax.transaction.TransactionManager</code> to be
* made available it to it (which is server-specific in standard J2EE).
* @see org.springframework.transaction.jta.JtaTransactionManager#setTransactionManager
*/
int PROPAGATION_NOT_SUPPORTED = 4;
/**
* Execute non-transactionally, throw an exception if a transaction exists.
* Analogous to EJB transaction attribute of the same name.
*/
int PROPAGATION_NEVER = 5;
/**
* Execute within a nested transaction if a current transaction exists,
* behave like PROPAGATION_REQUIRED else. There is no analogous feature in EJB.
* <p>Note: Actual creation of a nested transaction will only work on specific
* transaction managers. Out of the box, this only applies to the JDBC
* DataSourceTransactionManager when working on a JDBC 3.0 driver.
* Some JTA providers might support nested transactions as well.
* @see org.springframework.jdbc.datasource.DataSourceTransactionManager
*/
int PROPAGATION_NESTED = 6;
*************************************************************************
在这篇文章里,他用两个嵌套的例子辅助分析,我这里直接引用了。********************sample***********************
ServiceA {
/**
* 事务属性配置为 PROPAGATION_REQUIRED
*/
void methodA() {
ServiceB.methodB();
}
}
ServiceB {
/**
* 事务属性配置为 PROPAGATION_REQUIRED
*/
void methodB() {
}
} *************************************************
我们这里一个个分析吧
1: PROPAGATION_REQUIRED
加入当前正要执行的事务不在另外一个事务里,那么就起一个新的事务
比如说,ServiceB.methodB的事务级别定义为PROPAGATION_REQUIRED, 那么由于执行ServiceA.methodA的时候,
ServiceA.methodA已经起了事务,这时调用ServiceB.methodB,ServiceB.methodB看到自己已经运行在ServiceA.methodA
的事务内部,就不再起新的事务。而假如ServiceA.methodA运行的时候发现自己没有在事务中,他就会为自己分配一个事务。
这样,在ServiceA.methodA或者在ServiceB.methodB内的任何地方出现异常,事务都会被回滚。即使ServiceB.methodB的事务已经被
提交,但是ServiceA.methodA在接下来fail要回滚,ServiceB.methodB也要回滚2: PROPAGATION_SUPPORTS
如果当前在事务中,即以事务的形式运行,如果当前不再一个事务中,那么就以非事务的形式运行
这就跟平常用的普通非事务的代码只有一点点区别了。不理这个,因为我也没有觉得有什么区别3: PROPAGATION_MANDATORY
必须在一个事务中运行。也就是说,他只能被一个父事务调用。否则,他就要抛出异常。4: PROPAGATION_REQUIRES_NEW
这个就比较绕口了。 比如我们设计ServiceA.methodA的事务级别为PROPAGATION_REQUIRED,ServiceB.methodB的事务级别为PROPAGATION_REQUIRES_NEW,
那么当执行到ServiceB.methodB的时候,ServiceA.methodA所在的事务就会挂起,ServiceB.methodB会起一个新的事务,等待ServiceB.methodB的事务完成以后,
他才继续执行。他与PROPAGATION_REQUIRED 的事务区别在于事务的回滚程度了。因为ServiceB.methodB是新起一个事务,那么就是存在
两个不同的事务。如果ServiceB.methodB已经提交,那么ServiceA.methodA失败回滚,ServiceB.methodB是不会回滚的。如果ServiceB.methodB失败回滚,
如果他抛出的异常被ServiceA.methodA捕获,ServiceA.methodA事务仍然可能提交。5: PROPAGATION_NOT_SUPPORTED
当前不支持事务。比如ServiceA.methodA的事务级别是PROPAGATION_REQUIRED ,而ServiceB.methodB的事务级别是PROPAGATION_NOT_SUPPORTED ,
那么当执行到ServiceB.methodB时,ServiceA.methodA的事务挂起,而他以非事务的状态运行完,再继续ServiceA.methodA的事务。6: PROPAGATION_NEVER
不能在事务中运行。假设ServiceA.methodA的事务级别是PROPAGATION_REQUIRED, 而ServiceB.methodB的事务级别是PROPAGATION_NEVER ,
那么ServiceB.methodB就要抛出异常了。7: PROPAGATION_NESTED
理解Nested的关键是savepoint。他与PROPAGATION_REQUIRES_NEW的区别是,PROPAGATION_REQUIRES_NEW另起一个事务,将会与他的父事务相互独立,
而Nested的事务和他的父事务是相依的,他的提交是要等和他的父事务一块提交的。也就是说,如果父事务最后回滚,他也要回滚的。
而Nested事务的好处是他有一个savepoint。
*****************************************
ServiceA {
/**
* 事务属性配置为 PROPAGATION_REQUIRED
*/
void methodA() {
try {
//savepoint
ServiceB.methodB(); //PROPAGATION_NESTED 级别
} catch (SomeException) {
// 执行其他业务, 如 ServiceC.methodC();
}
}
}
********************************************
也就是说ServiceB.methodB失败回滚,那么ServiceA.methodA也会回滚到savepoint点上,ServiceA.methodA可以选择另外一个分支,比如
ServiceC.methodC,继续执行,来尝试完成自己的事务。
但是这个事务并没有在EJB标准中定义。
二、Isolation Level(事务隔离等级):
1、Serializable:最严格的级别,事务串行执行,资源消耗最大;
2、REPEATABLE READ:保证了一个事务不会修改已经由另一个事务读取但未提交(回滚)的数据。避免了“脏读取”和“不可重复读取”的情况,但是带来了更多的性能损失。
3、READ COMMITTED:大多数主流数据库的默认事务等级,保证了一个事务不会读到另一个并行事务已修改但未提交的数据,避免了“脏读取”。该级别适用于大多数系统。
4、Read Uncommitted:保证了读取过程中不会读取到非法数据。隔离级别在于处理多事务的并发问题。
我们知道并行可以提高数据库的吞吐量和效率,但是并不是所有的并发事务都可以并发运行,这需要查看数据库教材的可串行化条件判断了。
这里就不阐述。
我们首先说并发中可能发生的3中不讨人喜欢的事情
1: Dirty reads--读脏数据。也就是说,比如事务A的未提交(还依然缓存)的数据被事务B读走,如果事务A失败回滚,会导致事务B所读取的的数据是错误的。
2: non-repeatable reads--数据不可重复读。比如事务A中两处读取数据-total-的值。在第一读的时候,total是100,然后事务B就把total的数据改成200,事务A再读一次,结果就发现,total竟然就变成200了,造成事务A数据混乱。
3: phantom reads--幻象读数据,这个和non-repeatable reads相似,也是同一个事务中多次读不一致的问题。但是non-repeatable reads的不一致是因为他所要取的数据集被改变了(比如total的数据),但是phantom reads所要读的数据的不一致却不是他所要读的数据集改变,而是他的条件数据集改变。比如Select account.id where account.name="ppgogo*",第一次读去了6个符合条件的id,第二次读取的时候,由于事务b把一个帐号的名字由"dd"改成"ppgogo1",结果取出来了7个数据。 Dirty reads non-repeatable reads phantom reads
Serializable 不会 不会 不会
REPEATABLE READ 不会 不会 会
READ COMMITTED 不会 会 会
Read Uncommitted 会 会 会
三、readOnly
事务属性中的readOnly标志表示对应的事务应该被最优化为只读事务。这是一个最优化提示。在一些情况下,一些事务策略能够起到显著的最优化效果,例如在使用Object/Relational映射工具(如:Hibernate或TopLink)时避免dirty checking(试图“刷新”)。四、Timeout 在事务属性中还有定义“timeout”值的选项,指定事务超时为几秒。在JTA中,这将被简单地传递到J2EE服务器的事务协调程序,并据此得到相应的解释。
,
Spring事务的传播行为和隔离级别[transaction behavior and isolated level]2007-08-01 16:33事务的传播行为和隔离级别[transaction behavior and isolated level]
Spring中事务的定义:
一、Propagation : key属性确定代理应该给哪个方法增加事务行为。这样的属性最重要的部份是传播行为。有以下选项可供使用:PROPAGATION_REQUIRED--支持当前事务,如果当前没有事务,就新建一个事务。这是最常见的选择。
PROPAGATION_SUPPORTS--支持当前事务,如果当前没有事务,就以非事务方式执行。
PROPAGATION_MANDATORY--支持当前事务,如果当前没有事务,就抛出异常。
PROPAGATION_REQUIRES_NEW--新建事务,如果当前存在事务,把当前事务挂起。
PROPAGATION_NOT_SUPPORTED--以非事务方式执行操作,如果当前存在事务,就把当前事务挂起。
PROPAGATION_NEVER--以非事务方式执行,如果当前存在事务,则抛出异常。
很多人看到事务的传播行为属性都不甚了解,我昨晚看了j2ee without ejb的时候,看到这里也不了解,甚至重新翻起数据库系统的教材书,但是也没有找到对这个的分析。今天搜索,找到一篇极好的分析文章,虽然这篇文章是重点分析PROPAGATION_REQUIRED 和 PROPAGATION_REQUIRED_NESTED的
解惑 spring 嵌套事务 /**
* @author 王政
* @date 2006-11-24
* @note 转载自http://www.iteye.com/topic/35907?page=1
*/ ********TransactionDefinition 接口定义*******************
/**
* Support a current transaction, create a new one if none exists.
* Analogous to EJB transaction attribute of the same name.
* <p>This is typically the default setting of a transaction definition.
*/
int PROPAGATION_REQUIRED = 0;
/**
* Support a current transaction, execute non-transactionally if none exists.
* Analogous to EJB transaction attribute of the same name.
* <p>Note: For transaction managers with transaction synchronization,
* PROPAGATION_SUPPORTS is slightly different from no transaction at all,
* as it defines a transaction scopp that synchronization will apply for.
* As a consequence, the same resources (JDBC Connection, Hibernate Session, etc)
* will be shared for the entire specified scope. Note that this depends on
* the actual synchronization configuration of the transaction manager.
* @see org.springframework.transaction.support.AbstractPlatformTransactionManager#setTransactionSynchronization
*/
int PROPAGATION_SUPPORTS = 1;
/**
* Support a current transaction, throw an exception if none exists.
* Analogous to EJB transaction attribute of the same name.
*/
int PROPAGATION_MANDATORY = 2;
/**
* Create a new transaction, suspend the current transaction if one exists.
* Analogous to EJB transaction attribute of the same name.
* <p>Note: Actual transaction suspension will not work on out-of-the-box
* on all transaction managers. This in particular applies to JtaTransactionManager,
* which requires the <code>javax.transaction.TransactionManager</code> to be
* made available it to it (which is server-specific in standard J2EE).
* @see org.springframework.transaction.jta.JtaTransactionManager#setTransactionManager
*/
int PROPAGATION_REQUIRES_NEW = 3;
/**
* Execute non-transactionally, suspend the current transaction if one exists.
* Analogous to EJB transaction attribute of the same name.
* <p>Note: Actual transaction suspension will not work on out-of-the-box
* on all transaction managers. This in particular applies to JtaTransactionManager,
* which requires the <code>javax.transaction.TransactionManager</code> to be
* made available it to it (which is server-specific in standard J2EE).
* @see org.springframework.transaction.jta.JtaTransactionManager#setTransactionManager
*/
int PROPAGATION_NOT_SUPPORTED = 4;
/**
* Execute non-transactionally, throw an exception if a transaction exists.
* Analogous to EJB transaction attribute of the same name.
*/
int PROPAGATION_NEVER = 5;
/**
* Execute within a nested transaction if a current transaction exists,
* behave like PROPAGATION_REQUIRED else. There is no analogous feature in EJB.
* <p>Note: Actual creation of a nested transaction will only work on specific
* transaction managers. Out of the box, this only applies to the JDBC
* DataSourceTransactionManager when working on a JDBC 3.0 driver.
* Some JTA providers might support nested transactions as well.
* @see org.springframework.jdbc.datasource.DataSourceTransactionManager
*/
int PROPAGATION_NESTED = 6;
*************************************************************************
在这篇文章里,他用两个嵌套的例子辅助分析,我这里直接引用了。********************sample***********************
ServiceA {
/**
* 事务属性配置为 PROPAGATION_REQUIRED
*/
void methodA() {
ServiceB.methodB();
}
}
ServiceB {
/**
* 事务属性配置为 PROPAGATION_REQUIRED
*/
void methodB() {
}
} *************************************************
我们这里一个个分析吧
1: PROPAGATION_REQUIRED
加入当前正要执行的事务不在另外一个事务里,那么就起一个新的事务
比如说,ServiceB.methodB的事务级别定义为PROPAGATION_REQUIRED, 那么由于执行ServiceA.methodA的时候,
ServiceA.methodA已经起了事务,这时调用ServiceB.methodB,ServiceB.methodB看到自己已经运行在ServiceA.methodA
的事务内部,就不再起新的事务。而假如ServiceA.methodA运行的时候发现自己没有在事务中,他就会为自己分配一个事务。
这样,在ServiceA.methodA或者在ServiceB.methodB内的任何地方出现异常,事务都会被回滚。即使ServiceB.methodB的事务已经被
提交,但是ServiceA.methodA在接下来fail要回滚,ServiceB.methodB也要回滚2: PROPAGATION_SUPPORTS
如果当前在事务中,即以事务的形式运行,如果当前不再一个事务中,那么就以非事务的形式运行
这就跟平常用的普通非事务的代码只有一点点区别了。不理这个,因为我也没有觉得有什么区别3: PROPAGATION_MANDATORY
必须在一个事务中运行。也就是说,他只能被一个父事务调用。否则,他就要抛出异常。4: PROPAGATION_REQUIRES_NEW
这个就比较绕口了。 比如我们设计ServiceA.methodA的事务级别为PROPAGATION_REQUIRED,ServiceB.methodB的事务级别为PROPAGATION_REQUIRES_NEW,
那么当执行到ServiceB.methodB的时候,ServiceA.methodA所在的事务就会挂起,ServiceB.methodB会起一个新的事务,等待ServiceB.methodB的事务完成以后,
他才继续执行。他与PROPAGATION_REQUIRED 的事务区别在于事务的回滚程度了。因为ServiceB.methodB是新起一个事务,那么就是存在
两个不同的事务。如果ServiceB.methodB已经提交,那么ServiceA.methodA失败回滚,ServiceB.methodB是不会回滚的。如果ServiceB.methodB失败回滚,
如果他抛出的异常被ServiceA.methodA捕获,ServiceA.methodA事务仍然可能提交。5: PROPAGATION_NOT_SUPPORTED
当前不支持事务。比如ServiceA.methodA的事务级别是PROPAGATION_REQUIRED ,而ServiceB.methodB的事务级别是PROPAGATION_NOT_SUPPORTED ,
那么当执行到ServiceB.methodB时,ServiceA.methodA的事务挂起,而他以非事务的状态运行完,再继续ServiceA.methodA的事务。6: PROPAGATION_NEVER
不能在事务中运行。假设ServiceA.methodA的事务级别是PROPAGATION_REQUIRED, 而ServiceB.methodB的事务级别是PROPAGATION_NEVER ,
那么ServiceB.methodB就要抛出异常了。7: PROPAGATION_NESTED
理解Nested的关键是savepoint。他与PROPAGATION_REQUIRES_NEW的区别是,PROPAGATION_REQUIRES_NEW另起一个事务,将会与他的父事务相互独立,
而Nested的事务和他的父事务是相依的,他的提交是要等和他的父事务一块提交的。也就是说,如果父事务最后回滚,他也要回滚的。
而Nested事务的好处是他有一个savepoint。
*****************************************
ServiceA {
/**
* 事务属性配置为 PROPAGATION_REQUIRED
*/
void methodA() {
try {
//savepoint
ServiceB.methodB(); //PROPAGATION_NESTED 级别
} catch (SomeException) {
// 执行其他业务, 如 ServiceC.methodC();
}
}
}
********************************************
也就是说ServiceB.methodB失败回滚,那么ServiceA.methodA也会回滚到savepoint点上,ServiceA.methodA可以选择另外一个分支,比如
ServiceC.methodC,继续执行,来尝试完成自己的事务。
但是这个事务并没有在EJB标准中定义。
二、Isolation Level(事务隔离等级):
1、Serializable:最严格的级别,事务串行执行,资源消耗最大;
2、REPEATABLE READ:保证了一个事务不会修改已经由另一个事务读取但未提交(回滚)的数据。避免了“脏读取”和“不可重复读取”的情况,但是带来了更多的性能损失。
3、READ COMMITTED:大多数主流数据库的默认事务等级,保证了一个事务不会读到另一个并行事务已修改但未提交的数据,避免了“脏读取”。该级别适用于大多数系统。
4、Read Uncommitted:保证了读取过程中不会读取到非法数据。隔离级别在于处理多事务的并发问题。
我们知道并行可以提高数据库的吞吐量和效率,但是并不是所有的并发事务都可以并发运行,这需要查看数据库教材的可串行化条件判断了。
这里就不阐述。
我们首先说并发中可能发生的3中不讨人喜欢的事情
1: Dirty reads--读脏数据。也就是说,比如事务A的未提交(还依然缓存)的数据被事务B读走,如果事务A失败回滚,会导致事务B所读取的的数据是错误的。
2: non-repeatable reads--数据不可重复读。比如事务A中两处读取数据-total-的值。在第一读的时候,total是100,然后事务B就把total的数据改成200,事务A再读一次,结果就发现,total竟然就变成200了,造成事务A数据混乱。
3: phantom reads--幻象读数据,这个和non-repeatable reads相似,也是同一个事务中多次读不一致的问题。但是non-repeatable reads的不一致是因为他所要取的数据集被改变了(比如total的数据),但是phantom reads所要读的数据的不一致却不是他所要读的数据集改变,而是他的条件数据集改变。比如Select account.id where account.name="ppgogo*",第一次读去了6个符合条件的id,第二次读取的时候,由于事务b把一个帐号的名字由"dd"改成"ppgogo1",结果取出来了7个数据。 Dirty reads non-repeatable reads phantom reads
Serializable 不会 不会 不会
REPEATABLE READ 不会 不会 会
READ COMMITTED 不会 会 会
Read Uncommitted 会 会 会
三、readOnly
事务属性中的readOnly标志表示对应的事务应该被最优化为只读事务。这是一个最优化提示。在一些情况下,一些事务策略能够起到显著的最优化效果,例如在使用Object/Relational映射工具(如:Hibernate或TopLink)时避免dirty checking(试图“刷新”)。四、Timeout 在事务属性中还有定义“timeout”值的选项,指定事务超时为几秒。在JTA中,这将被简单地传递到J2EE服务器的事务协调程序,并据此得到相应的解释。
,
发表评论
-
Spring <context:annotation-config/> 解说
2015-04-28 10:54 512Spring <context:annotation-c ... -
Spring注解_详解
2015-04-28 09:16 485Spring注解_详解 @Autowired 注释 将 @ ... -
spring
2015-04-08 18:00 532Spring面试题一 目录 一、Spring工作原理 二、为 ... -
J2EE学习思想
2008-01-11 22:39 1096第七步,J2EE编程 以上的学习过程如果是比较顺利的话,进行到 ... -
Spring的任务调度管理2
2008-01-10 13:12 2158Spring的任务调度管理从兴公司 | 陈百平在项目开发 ... -
Spring自动代理配置事务
2007-12-06 17:36 3168转自 http://www.sunxin.org 在使用Sp ... -
OpenSessionInView
2007-12-06 15:50 1087Hibernate的Lazy初始化1:n关系时,你必须保证是在 ... -
Spring使用Quartz调度器 实现时间点任务(Spring in Action中文版)
2007-10-12 11:42 21337.3.2 使用Quartz调度器 Quartz调度器为调度 ... -
ApplicationContext加载服务配置
2007-10-10 13:00 1376<bean id="probeDelive ... -
web.xml加载servlet
2007-10-10 12:58 1863<servlet> <servle ... -
SessionFactoryUtils.getSession(getSessionFactory(), true);
2007-09-06 09:32 6575SessionFactoryUtils.getSession( ...
相关推荐
spring事务的传播特性和事务隔离级别
事务传播特性&事务隔离级别 详细的事务传播特性&事务隔离级别
spring 事务传播与隔离级别DEMO 脏读、重复读、幻影读 spring 事务传播与隔离级别DEMO 脏读、重复读、幻影读
Spring事务的传播特性和隔离级别 事务的几种传播特性详细介绍
事务的属性:1.Propagation:用来设置事务的传播行为事务的传播行为:一个方法运行在了一个开启了事务的方法中时,当前方法是使用原来的事务还是开启了一个新
主要介绍了Spring事务传播属性和隔离级别详细介绍,同时涉及传播行为介绍,超时设置等相关内容,需要的朋友可以参考下。
Java面试题54.Spring事务的传播特性和隔离级别.mp4
系统理解spring事务传播属性,和隔离级别
Spring控制Hibernate中的事务传播特性与隔离级别操作,通过利用spring和Hibernate的两个HibernateTemplate 和 jdbcTemplate类,实现数据的交互。
Spring 管理事务(传播特性、隔离级别、readonly).rar
02.Spring支持的常用数据库事务传播属性和事务隔离级别
java面试宝典
【Spring五个事务隔离级别和七个事务传播行为】 数据库事务和Spring事务是一般面试都会被提到,很多朋友写惯了代码,很少花时间去整理归纳这些东西,结果本来会的东西,居然吞吞吐吐答不上来。 下面是我收集到一些...
上面我们只是简单的使用事务,这里将讨论Spring事务机制中最重要的两个配置项,即隔离级别与传播行为。毫无疑问本节内容是本章的核心内容,也是互联网企业最关注的内容之一,因此他十分重要,值得花费大的篇幅去讨论...
此ppt中前半部分通过spring事务的60道题的测试,摸底对事务的掌握情况,后半部分,对spring中的事务属性(传播行为、隔离级别、回滚规则、事务超时、是否只读)进行说明
上文理解到对spring事物,事物的隔离机制,这片具体说下事物的传播机制和隔离机制
Spring 事务隔离与事务传播的详解与对比 Spring是SSH中的管理员,负责管理其它框架,协调各个部分的工作。今天一起学习一下Spring的事务管理。Spring的事务管理分为声明式跟编程式。声明式就是在Spring的配置文件中...
可以在spring中对整个项目的事务进行控制
此外,Spring事务管理器支持多种类型的事务策略,包括不同的传播行为和隔离级别,允许开发者根据具体业务场景选择最合适的事务管理策略。深入理解Spring声明式事务的工作原理,不仅能帮助开发者更高效地使用Spring...
3.并发事务带来的问题和解决方案(包含四种隔离级别和会产生的锁) 4.逐个分析脏读,不可重复读和幻读出现的场景和解决方案 5.事务的底层原理(附带流程图) 6.事务的7种传播性、使用场景和实际场景 7.spring事务15...